How to detect whether there is a bad phenomenon in the insulated terminal, we often check whether there is a bad phenomenon in the insulated terminal, because if the insulated terminal is purely bad, it will cause the circuit to be unstable. In other words, we can be a momentary power failure , And more serious damages to electronic products. Therefore, in order to prevent such incidents from happening, we must take strict preventive measures. So how to do terminal prevention work?

1. Through testing of crimped wires

When the contact is unreliable and unlocked, the cause of the stuck phenomenon of each burr or dirt is passed the test. For this reason, the method of inspecting the sample plug manufacturer to deliver all the tools for the installation hole to insulate the electrical equipment terminal is crimp Go to the conductor simulation position and check whether the detachable pin or hole is locked.

2. Torque check

If you want to check the reliability of the insulated terminal structure, you can use this method.

3. Interchangeability check

The interchangeability check is to adapt to the matching plugs and sockets of the same series. From this, you can find out whether the plug, positioning, and locking fail due to lack of assembly due to the size of the components. In other words, we can be the beginning of the end.

https://www.kf-terminals.com/