Crimp insulated terminal wire is a core technology in the production of all terminal wires. Application standards are almost everywhere. Today we will talk about several precautions for crimping terminal wires. In the process of crimping insulated terminal wires, with years of experience in cable harness assembly, precise and exquisite crimping techniques have always been strictly required to ensure that all crimped insulated terminal wires meet industry standards and customer requirements. The following are several precautions and statements for bad problems when crimping terminal wires.

1. There is no thin language or breakage in the insulating layer;
2. The insulating material completely enters and extends out of the insulating crimping piece;
3. The insulating material is melted into strands, and the wires are not crimped and fixed.
4. The contacts have significant cracks and cracks, and there is no line splitting phenomenon;
5. Wires must not be flat, twisted, bent, kinked or deformed;
6. Damaged insulation can cause safety problems and potential hazards to the wire.
7. Insulation materials should not show signs of crushing, pulling, abrasion, discoloration, charring and burning; 8. Prepared wires must also be in tough working condition and not scratched, cut, cut or damaged.
8. Insulation crimping also requires substantial support and wrapping of the insulation to ensure that it will not cause any damage or destruction to the insulation;
9. Wires remain in connector, crimp crimps Centered insulation crimps must also provide a minimum lateral reference of 180 degrees. Insulated terminal wire crimping If the crimping process is not good, it is easy to cause terminal damage and poor pin extraction. Care must be taken during production and inspection.