News

Torque control of power terminal

Update:08-11-2021
Abst:

The use of terminal blocks in different industries is v […]

The use of terminal blocks in different industries is very extensive, but because there is no accurate regulation in the use of terminals, there are many cases of product damage due to the violent use of the product. How should we use it correctly? What about UK series terminal blocks?


The first is the torque control and requirements for the metal contact body. In the UK series terminal blocks, the torque requirements that the terminals meet are clearly specified. The torque within this range will not damage the product and normalize the use of the product. Take the UK2.5B terminal block as an example. In the IEC60947-1 standard of the terminal industry, it clearly stipulates that the copper part of the product meets the torque 0.8N, so we can use this as a standard in the use of the product, and take 0.8N Torque, so that the loss rate of the product can be used in actual use.
The second is the power requirements of the plastic part when in use. We know that the main function of the plastic part is to be clipped to the rail to fix the terminal itself. However, due to the cold weather in winter and the drop in air humidity, the product's toughness is lacking. Therefore, we should pay special attention to this link during use. During use, we should slowly increase the pressure and stop exerting force after hearing the "pop". The normal use of the product.

https://www.kf-terminals.com/

0

Recommended Products

You can tick the products you need and communicate with us in the message board.

CN

KF China Factory

AS

KF Asia Office

USA

KF America Office

EUR

KF Europe Office